Cervis TM70 Manual de usuario descargar pdf (Pagina 12)

I K U S I

21/05/2008

9 Check the possible Data Led Failures described below in order to fix the system. Once the system is fixed, go to . ( ).

DATA LED FAILURE

CHART 9

START

CHART 1 (I)

POSSIBLE ERROR SOURCE RECOMMENDED ACTION

1. Frequency interference from other system. Go to .

2. Transmitter not sending the correct signal. Check if the problem is solved with a spare transmitter. Go to .

3. Receiver not receiving the correct signal. Replace the LR71 or LR72 card keeping the EEPROM.

(NOTE: First check point 1 and if this doesn’t solve the problem, check point 2; if the problem still is not solved, check point 3).

POSSIBLE ERROR SOURCE RECOMMENDED ACTION

1. Frequency interference from other system. Go to .

2. Transmitter not sending the correct signal. Check if the problem is solved with a spare transmitter. Go to .

3. Receiver not receiving the correct signal. Replace the LR71 or LR72 card keeping the EEPROM.

(NOTE: First check point 1 and if this doesn’t solve the problem, check point 2; if the problem still is not solved, check point 3).

CHART 2

CHART 11 (I)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Sin comentarios

Cervis TM70 Manual de usuario Pagina 12